Mark 9.5 Max S
The Mark 9.5 with Max S runs at 4,500 to 5,000 cigarettes per minute on the MK-9.5 maker unit, the updated version of the Mark 9 platform. This unit is a reconditioned machine, inspected and tested before it ships, with a documented service record included.
Spec sheet
- Rated Speed
- 4,500 – 5,000 Cigarettes Per Minute
- Maker Unit
- MK-9.5 Tobacco Cigarette Making Machine
- Rod Circumference
- 17mm – 28.3mm
- Combined Rod Length
- 65mm – 110mm
- Filter Combiner
- Max-S Filter Assembler with Mass Flow Tray Filler
- Standard Format
- Standard 84mm
- Approximate Weight
- 7,800 Kgs. (Approx.)
About the Mark 9.5 Max S
The Hauni Max-S filter assembler pairs with a mass flow tray filler to handle filter attachment and output collection in one integrated stage rather than two separate handoffs. That matters most on long runs, where fewer transfer points between stages generally means less material waste and fewer stoppages to clear jams.
At 7,800 kg, this is a mid-weight machine relative to the Protos platform, sitting between the lighter Mark 8 configurations and the heavier Protos units. The 84mm default setup covers standard king size production, with the circumference and rod length ranges giving room to run other formats within the same platform.
Format Range and Who This Machine Suits
At 4,500 to 5,000 cpm, this sits above the Mark 8 platform on speed while running a different mechanical design than the Protos line. Factories standardizing on the Molins Mark platform who need more speed than the Mark 8 series offers, without moving to the Hauni Protos design, are the clearest fit here.
Buying This as a Reconditioned Unit
A reconditioned Mark 9.5 has already run in a working factory, meaning the platform's known mechanical issues were found and resolved long before this unit reached inspection. That gets you a tested, factory-proven machine at a fraction of new-equipment cost, with documented service history included.
Looking at Other Options
For the same MK-9.5 maker with Lenze servo drives instead of the standard drive setup, the Mark 9.5 with Lenze Servo Drives is also in stock. The full range of cigarette manufacturing machines is here if you want to compare across platforms.
Frequently Asked Questions
Is this a new or reconditioned machine?+
This is a reconditioned Mark 9.5 with Max S, inspected and tested before resale, with a documented service history included.
What is the difference between this and the Mark 9.5 with Lenze Servo Drives?+
Both run the MK-9.5 maker at the same rated speed. The Lenze Servo Drives version uses a different drive system for the maker unit. Check both product pages for the specific configuration that fits your line.
What is the default cigarette format for this machine?+
Standard 84mm, with a circumference and rod length range that allows other formats within the same setup.
What is the total weight of this unit?+
Approximately 7,800 kg.
More from Cigarette Manufacturing Machines
Protos 80 ER
- Rated Output
- 8,000 cpm (Regular Dia), 7,000 cpm (Slim & Super Slim)
- Rod Circumference
- 17mm – 28.3mm
- Combined Rod Length
- 65mm – 110mm
- Control System
- SIEMENS IPC or BECKHOFF IPC
Protos 70
- Rated Output
- 7,000 cpm (Regular Dia), 6,000 cpm (Slim & Super Slim)
- Rod Circumference
- 17mm – 28.3mm
- Combined Rod Length
- 65mm – 110mm
- Control System
- SIEMENS IPC or BECKHOFF IPC
Mark 8 Post-64
- Rated Speed
- 1,800 – 2,000 Cigarettes Per Minute
- Maker Unit
- Molins MK-8 'Post 64' with Double Color Printer
- Rod Circumference
- 17mm – 28.3mm
- Combined Rod Length
- 65mm – 110mm